Leaking Central Heating Pipes Detection Using A Thermal Camera

What Can The Thermal Imaging Camera Do?

The camera generally is a highly effective tool for both central heating and plumbing engineers in detecting water leakage from hidden pipes positioned below floors.

It helps in finding the pipe routes without the need to remove or dig up any type of flooring, like tiles and hardwood flooring.

The camera removes the need for guess work on pipe places and can in many cases detect where any form of water leakage maybe.

What Type Of Camera Do I Need?

There are many different types of thermal imaging cameras round today to select from, but in my experience the cheaper ones must be avoided for detecting water leakage.

The very best advise could be to have a look at the middle priced range of camera, it’ll give better image quality and that image storage, as well locating water leakage underneath floors.

Central Heating Leak Detection

Overtime a longtime central heating system can and can develop some form of water leakage. This sometimes happens when the boiler is replaced.

The old boiler worked with a small header tank located in the loft so was not below lots of pressure.

The new boiler is now pressurised and the header tank now not needed. The pipe work has only been tested on low pressure so when transformed to high pressure a leak might happen.

These types of leaks might not show up right away, they’ll cause damp patches to seem on ceilings and walls, even pressure loss from the central heating system. These leaks if left, can cause damage and must be located and repaired.

This is where the thermal imaging camera comes in, it could actually find the water leakage and level you in the suitable direction to repair the leak.

Does Your Heating System Want A Powerflush?

The central heating system if not treated with an inhibitor will suffer from sludge build up within the boiler, radiators and lens pipe work.

Sludge is caused by all the totally different metals related to the system, while you add water a conductor, a response is began and sludge starts to form.

When you’ve got sludge in your central heating system you’re throwing cash down the drain. Sludge causes the boiler to work harder to provide the warmth you need.

Sludge puts pressure on all working components within the heating system and can extra time cause blockages within the system inflicting a system breakdown.

The thermal imaging camera can determine if you are affected by sludge build up within your system and point you in the right direction as as to whether you need a powerflush or not.

Checking The Powerflush Has Cleaned The System

Once the powerflush has been carried out, the thermal imaging camera can be used to check that everything is clean. Images may be taken and stored then forwarded on to the shopper with a report on the situation of the central heating system.

Advantages Of Utilizing The Thermal Imaging Camera

The thermal imaging camera will find hidden issues quicker than regular process of lifting floors and searching for the problem.

Decide if the central heating system really needs a powerflush.

Present proof to the customer with images that the powerflush has been completed correctly.

Find underfloor heating pipe routes and detect any points that may be present.

The thermal imaging camera has many advantages for the heating and plumbing engineers, to your customers, it makes you look more professional, and will usher in more work as soon as the word gets around.